RF & Microwave Passive Component Simulation
Design and optimize filters, couplers, dividers, and other RF passive components.
Ein gedruckter Wilkinson RF Power Splitter mit 9 GHz, der das Eingangssignal in zwei gleichphasige Ausgangssignale aufteilt."
Design und Simulation von Single-Band Planar Crossover basierend auf Coupled Line mit HFWorks für SOLIDWORKS
Hochfrequenz- und Mikrowellensysteme erfordern typischerweise perfekte Leistungsverteilungsnetze, die über zwei Arten von Mikrowellenstrukturen ausgeführt werden: Teiler zum Aufteilen eines Eingangssignals in zwei oder mehr Ausgangssignale und Kombinierer zum Zuordnen von HF-Eingangssignalen von mehreren Eingängen zu einem einzelnen HF-Ausgangssignal .
This application note presents the design and 3D full-wave analysis of a compact planar microstrip crossover intended for monolithic ICs and antenna arrays at 2.4 GHz. The structure consists of a square microstrip patch with perpendicular rectangular and arc-shaped slots, fed by four orthogonal microstrip lines over a high-permittivity substrate. S-parameter results show a 12% bandwidth centered at 2.4 GHz, return loss better than 10 dB, insertion loss below 1 dB, and isolation above 13 dB. Simulated and measured data are in close agreement, confirming the crossover’s suitability for use in beam-forming and other multiport RF networks.