Crossovers are very interesting passive devices in monolithic Integrated Circuits (IC) and antenna arrays. These devices maintain signal purity when transmission lines intersect. There are several types of crossovers. Printed planar crossovers are the most used thanks to their compact and simple structure. In this article, a compact planar crossover is designed using the CAD SOLIDWORKS and simulated using the full wave 3D simulator HFWorks. An S Parameter analysis is conducted to investigate the electromagnetic behavior of this structure. Figure 1 shows the fabricated prototype of the proposed crossover.
 
top-header
newsletter-banner
 
  Upcoming Webinars  
 
  design-and-analysis-of-a-three-phase-induction-motor-using-magnetic-equivalent-circuit-mec-and-finite-element-methods-fem

Design and Analysis of a Three-Phase Induction Motor Using Magnetic Equivalent Circuit (MEC) and Finite Element Methods (FEM)

Thursday, September 08, 2022
Session 1: 03:00 PM CEST, 01:00 PM GMT
Session 2: 02:00 PM EDT, 06:00 PM GMT

REGISTER

 
 
  how-to-maintain-a-stable-communication-with-your-drone

How to Maintain a Stable Communication With Your Drone

Thursday, September 15, 2022
Session 1: 03:00 PM CEST, 01:00 PM GMT
Session 2: 02:00 PM EDT, 06:00 PM GMT

REGISTER

 
 
  modeling-of-linear-electric-motors

Modeling of Linear Electric Motors

Thursday, September 22, 2022
Session 1: 03:00 PM CEST, 01:00 PM GMT
Session 2: 02:00 PM EDT, 06:00 PM GMT

REGISTER

 
 
 
  Upcoming Exhibitions  
 
  energy-conversion-congress-and-exposition-2022-booth-321

Energy Conversion Congress And Exposition 2022

Sunday, October 9, 2022 - Thursday, October 13, 2022
Detroit, Michigan USA
Booth #321

 
 
  asnt-2022-booth-319

ASNT 2022

Monday, October 31, 2022 - Thursday, November 3, 2022
Nashville, Tennessee, USA
Booth #319

 
 
 
 
 
Application Note
Design and Simulation of a Compact Planar Micro-Strip Crossover for Beam Forming Networks Using Hfworks for SOLIDWORKS
Crossovers are very interesting passive devices in monolithic Integrated Circuits (IC) and antenna arrays. These devices maintain signal purity when transmission lines intersect. There are several types of crossovers. Printed planar crossovers are the most used thanks to their compact and simple structure.
In this article, a compact planar crossover is designed using the CAD SOLIDWORKS and simulated using the full wave 3D simulator HFWorks. An S Parameter analysis is conducted to investigate the electromagnetic behavior of this structure. Figure 1 shows the fabricated prototype of the proposed crossover.

Read More >

design-and-simulation-of-a-compact-planar-micro-strip-crossover-for-beam-forming-networks-using-hfworks-for-solidworks
 
 
 
Blog Post
Design and Analysis of Wireless Power Transfer Charger for Electric Vehicles
In simple terms, wireless power transfer is the transmission of electric power without any direct physical wire or cable connections. The power transfer is usually based on the technology that utilizes electric, magnetic, or electromagnetic fields. WPT happens by creating an alternating magnetic field on the transmitter coil. This magnetic flux is then converted into an electrical current in the receiver coil.? The generated electrical current depends on the amount of flux generated by the transmitter coil, and how much of a percentage the receiver coil can capture. The distance, size, and position of the receiver coil relative to the transmitter coil decide the “coupling factor or coupling coefficient” of the two coils.

Read More >

design-and-analysis-of-wireless-power-transfer-charger-for-electric-vehicles
  design-and-analysis-of-wireless-power-transfer-charger-for-electric-vehicles design-and-analysis-of-wireless-power-transfer-charger-for-electric-vehicles  
 
 
 
 
 

EMWorks Inc.

150 Montreal-Toronto Blvd, Suite 120,
Montreal, Quebec, H8S 4L8, Canada.

 
Get in touch with us
linkedin facebook youtube twitter